20
Using the TV’s menu

PICTURE FEATURES
AUTO VNR
VNR Stands for “video noise reduction”.
AUTO:
This mode reduces any “noise” (interference
or snowing) in the current picture. The
function also adjusts the optimum sharpness
of the picture (SHARP).
MIN:
The AUTO VNR function is cancelled. If
you set the mode to AUTO but feel that the
sharpness of the original picture has not been
reproduced fully, change the mode to MIN.
However, any noise remaining in the original
picture may be emphasized.
MAX:
This mode always reduces any noise as much
as possible, irrespective of state of the
picture. When you set the mode to AUTO but
still notice some noise, change the mode to
MAX. However, this may reduce the
sharpness of the picture.
COLOUR SYSTEM
The colour system is chosen automatically.
However, if the picture is not clear or no
colour appears, choose the colour system
manually.
1 Choose COLOUR SYSTEM then
press the a button
2 Press the 5 buttons to chose the
appropriate colour system.
Then press the a button
PAL:
PAL system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from
the input signal. You can only use this when
you are viewing a picture from programme
number PR 0 (AV), or EXT terminal.
• The AUTO function may not work
properly if you have poor signal quality.
If the picture is abnormal in the AUTO
function, choose another colour system
manually.
• You cannot choose NTSC 3.58 or NTSC
4.43 for programme number PR 0 (AV) to
PR 99.
AV-32&28T67SKE.fm Page 20 Thursday, February 6, 2003 10:33 AM