Using the TV’s menu
23

To cancel the y (S-VIDEO input)
setting:
Press the yellow button and turn off y
(S-VIDEO input) mark. The regular video
signal (composite signal) pictures are
resumed.
• The EXT-1 terminal does not support
S-VIDEO signal (Y/C signal) and you
cannot set y (S-VIDEO input) in
the EXT-1 terminal.
• Setting y (S-VIDEO input) changes
the head character from “E” to “S”.
When an EXT terminal receives a
normal video signal, “E1”, “E2”, “E3”
or “E4” appears on the display. This
changes to “S2”, “S3” or “S4” when it
receives an S-VIDEO signal.
• Even a device which can output an S-
VIDEO signal (Y/C signal) may
output a regular video signal
(composite signal) depending on the
device setting. If a picture cannot
appear because the y (S-VIDEO
input) setting has been made, read the
device instruction manual carefully
again to check for the device settings.
LIST
You can store a name for each of the devices
connected to each EXT terminal. Giving a
name to an EXT terminal makes the EXT
terminal number appear on the screen,
together with its name.
1 Choose an EXT terminal
2 Press the blue button to display the
name list (LIST)
3 Press the 6 buttons to choose a
name. Then press the a button
The LIST disappears and the name is
assigned to the EXT terminal.
• You cannot choose an EXT terminal
name that is not on the name list
(LIST).
To erase a name assigned to the
EXT terminal:
Choose a blank space.
4 Press the a button to complete
the setting
DUBBING
You can choose a signal source to be output
from the EXT-2 terminal.
You can do this with the output signal of the
device connected to another EXT terminal,
or the picture and sound from a TV channel
you are currently viewing.
1 Press the 5 buttons to choose
the arrow from the menu
AV-32&28T67SKE.fm Page 23 Thursday, February 6, 2003 10:33 AM