ANSWERING SYSTEM OPERATION

At Cordless Handset or Touch Tone Phone

Remote ON/OFF

Review ON/OFF Status

Connect with the answering system. Press ). The system announces the current status, then beeps twice and is ready to accept a command.

Turning System Off

1Connect with the answering system.

2Press *0. The system announces "The machine is off," then beeps twice to indicate it is ready to accept a command.

Turning System On

When the system is off, it answers after 10 rings, and announces “The machine is off,” then beeps twice to indicate it is ready to accept a command. Press *0. The system announces "The machine is on," then beeps twice.

Recording a Message When System is Off

Press #when the system answers after 10 rings. The system will beep to signal you to begin speaking.

Changing Settings

1Connect with the answering system.

2Press *, 9. You hear “To listen to settings, press 9.”

3Press 9. You hear the currently selected announcement, followed by “To select a different announcement, press 6 or 4.”

4Press 6or 4to change the selected announcement. Press 9to save the setting.

5The system announces the current ring select setting, followed by "To change the number of rings or select toll saver, press 6 or 4."

6Press 6to increase number of rings, or 4to decrease number of rings. Press 9to save the setting.

7The system announces the current message alert setting, followed by "To turn on or off, press 6 or 4."

8Press 6or 4to change the setting. Press 9to save the setting.

9The system announces Remote Access Code, followed by "To select the first digit, press 6 or 4, then press 9."

10Press 6to increase the first digit or 4to decrease it, then press 9to save it. Continue in the same way for the second and third digits.

2 6

7630_book.1AT&T

26

8/12/98, 6:29 PM

Page 27
Image 27
AT&T 7630 user manual Remote ON/OFF, Recording a Message When System is Off, Changing Settings