AT&T 7630 user manual Conecting to a Call With the Speakerphone, Speakerphone Volume Control, Mute

TELEPHONE OPERATION

At the Base

Answering a Call

To answer using the Speakerphone, press Kon the base. The SPEAKER light goes on, and the call is connected. To end the call, press Kagain.

Conecting to a Call With the Speakerphone

You can make a call at the handset, and then switch to using the speakerphone.

1Make a call at the handset.

2Press Kon the base to connect to the call.

3Press Pon the handset to disconnect the handset.

4To end the call, press Kon the base.

Speakerphone Volume Control

Press +to increase speakerphone volume. Press -to decrease volume.

Mute

Mute allows you to hear your caller, but prevents the caller from hearing you. To activate the Mute feature, press U. The MUTE light on the base goes on. To deactivate the Mute feature, press Uagain.

Hold

Press H. The speaker light flashes.

To return to the call, press Hagain

— OR —

Press Pon the handset

— OR —

Press K on the base

— OR —

Lift the handset of an extension phone on the same line.

Page/Intercom

1Press the button on the base. This sends a three-part paging tone to the handset.

2When the Ibutton on the handset is pressed and when the INTERCOM/LOW BATT light on the handset goes on, the handset and base can communicate with each other without tying up the telephone line.

3Press Ion the handset to close the intercom connection.

NOTE: The handset RINGER switch must be set to ON to operate this feature.

1 3

7630_book.1AT&T 13 8/12/98, 6:28 PM