
Initial Setup
Auto Tuner Setup
If you have already run the Auto Tuner as part of the quick setup earlier in this guide, please skip ahead to “Channel Summary” to continue setting up your television. In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means you scan using the CHANNEL +/- buttons), you will receive only clear active channels.
Press the MENU button
π† To AUTO TUNER SETUP
è To operate
è To choose CABLE or AIR
Press the OK button to start
AUTO TUNER SETUP
| TUNER MODE | CABLE |
|
| PRESS OK TO START |
| |
|
|
|
|
| SELECT OPERATE | MENU EXIT |
|
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.
Press the MENU button when finished
Channel Summary
Channel summary allows you to customize the
Press the MENU button π† To CHANNEL SUMMARY √® To operate
The Channel summary screen will now be displayed with the channels set to scan marked with an “√”. You can delete channels from the scan by removing the “√”. If any channels were missed during auto tuner setup and you wish to add them, you may by placing an “√” next to the channel number.
π†√® To the SCAN column
Press the OK button to include or delete from scan
Press the MENU button when finished
You can block access to a channel by activating the channel lock. Press the MENU button
π† To CHANNEL SUMMARY √® To operate
π†√® To the Lock Column ( )
Press the ZERO button to lock or unlock that channel Press the MENU button when finished
CHANNEL SUMMARY
CHNO. | SCAN ID |
| CHNO. SCAN |
| ID | |
01 |
|
| 06 | HBO | ||
02 | MTV |
| 07 |
| L | |
03 |
|
| 08 |
|
|
|
04 | A&E |
| 09 |
|
|
|
|
|
|
| |||
|
|
|
| |||
05 | E! |
| 10 |
|
|
|
|
|
|
|
| ||
SELECT OK | OPERATE | MENU EXIT |
23