JVC AV-32S565 manual Initial Setup

Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 22 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below.

Press the MENU button π† To AUTO TUNER SETUP √® To operate

è To choose CABLE or AIR Press the OK button to start

AUTO TUNER SETUP

TUNER MODE	CABLE
PRESS OK TO START
SELECT OPERATE	MENU EXIT

Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.

Press the MENU button when finished

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels.

Press the MENU button π† To CHANNEL SUMMARY √® To operate

The Channel summary screen will now be displayed with the channels set to scan marked with an “√”. You can delete channels from the scan by removing the “√”. If any channels were missed during auto tuner setup and you wish to add them, you may by placing an “√” next to the channel number.

π†√® To the SCAN column

Press the OK button to include or delete from scan

Press the MENU button when finished

You can block access to a channel by activating the channel lock. Press the MENU button

π† To CHANNEL SUMMARY √® To operate

π†√® To the Lock Column ( )

Press the ZERO button to lock or unlock that channel Press the MENU button when finished

CHANNEL SUMMARY

CHNO.	SCAN ID		CHNO. SCAN		ID
01			06	HBO
02	MTV		07		L
03			08
04	A&E		09
05	E!		10
SELECT OK		OPERATE		MENU EXIT

30