JVC AV-P960E Presenting Printed Materials

E-11

English

1.

Adjusting the arm and camera head

Adjust the arm and camera head in accordance with the size of

the object.

●Ensure that the camera head is positioned at the centre of the

object.

●The arm is catered to capture an A3 landscape equivalent object

when fully extended.

2.

Adjusting lighting

Adjust such that the object is evenly lighted.

3.

Adjusting zoom

Adjust such that the portion of the object to

be captured occupies the full screen.

4.

Adjusting brightness

Adjust when the screen is too bright or too

dim.

Press the [AUTO] button and the appropri-

ate brightness will be adjusted automatically.

5.

Adjusting focus

To adjust the focus when it is out.

Press the [AUTO] button and the focus will

be adjusted automatically.

Presenting Printed Materials

●For materials with a mixture of portrait and landscape printed

materials, it may be more convenient to save either one of the

orientations under the user setting. (☞ Page 19 ‘Saving the Set-

tings (User Setting Registration)’)

2.

2.

1.

1.

(Example) Too little zooming.

(Example) Focus is out.

(Example) Poor lighting.

(Example) Correctly adjusted.

OUT IN

ZOOM

AUTO

BRIGHT

AUTO

FOCUS

Up to A3 landscape equivalent (376 mm x 282 mm) printed materials can be captured.

Arm

Camera Head

[FOCUS] button

[ZOOM]

button

[BRIGHT] button

Note

Contents

Main AV-P960E DIGITAL PRESENTER (A) INSTRUCTIONS Italiano Safety Precautions Smooth, High Resolution Images High Definition and High Power Zoom Small, Lightweight and Slim Design Built-in SD Card Slot Table of Content Precautions Names and Functions Overall View @ %^ & * ! 0 9 8 6 4 2 1357# Names and Functions (continued) Control Panel Page 1[AC IN] Power Inlet 2[MONITOR OUTPUT] Terminal 3[RGB OUTPUT] Terminal 4[USB] Connector Names and Functions (continued) 1 2 4 6 7 853 Before Using Lift up the right illumination 5. 3. 7. Connection 1. 3. 4. 2. 5. Adjusting the arm and camera head Presenting Printed Materials 1. 2. 2. 1. Adjusting the arm and camera head Presenting 3-dimensional Objects 2. 6. 2. 1. Shooting Surrounding Objects 1. 3. 2. Place a piece of white paper on the Presenting Slide Films 2. 2. 1. 3. 5. 6. 4. Presenting Films and Other Transparent Materials 1. 4. 3. 5. 6. Capturing Images Through a Microscope 4. 3. 2. 5. Press [PICTURE MEMORY 1] button for more than 2 seconds ~ Saving Images in the Picture Memory 1. 5. Retrieving Stored Images Place a piece of white paper on the Press the [WHITE BALANCE AUTO] button Adjusting the White Balance Adjusting the White Balance Automatically Adjusting the White Balance Manually RED BLUE Saving the Settings (User Setting Registration) Storing Images in SD Card Insert the SD card Deleting images Press the [SAVE] button for more than 2 seconds 2. 3. Viewing Image Data Stored in SD Card 1. 5. 2.,3. 3. 3. Connecting to Computer via the USB Connector Compatible Computers When connecting for the first time Operating Methods Turn on the power Operating the Remote Control Unit Remote control receiving range 31 2 4 5 6 7 8 Installing LCD Monitor 2. 1. Troubleshooting E-26 Specifications GENERAL OPTICAL LIGHTING CAMERA HEAD Dimensions (WHD) (unit: mm)