E-23
English
1[CAMERA]
To output the camera images.
(☞ Page 6 5 [SOURCE SELECT] Buttons)
2[FREEZE]
To make the camera image still.
(☞ Page 6 4 [FREEZE] Button)
3[EXT-IN]
The images of the device connected to the [EXT INPUT] terminal
will be outputted.
(☞ Page 6 5 [SOURCE SELECT] Buttons)
4[SD CARD]
To perform functions related to SD card.
●While displaying images from other sources, SD selection mode
will be activated if this button is pressed.
(☞ Page 6 5 [SOURCE SELECT] Buttons)
5[BRIGHT]
To adjust the brightness of the camera image.
(☞ Page 6 2 [BRIGHT] Adjustment Buttons)
6[FOCUS]
To adjust the focus of the camera image.
(☞ Page 6 3 [FOCUS] Button)
7[ZOOM]
To reduce or enlarge the camera image.
(☞ Page 6 1 [ZOOM] Adjustment Buttons)
8[AUTO WHITE]
To adjust the white balance automatically.
(☞ Page 7 $ [WHITE BALANCE] Adjustment Buttons)
*For details on the various functions, refer to page 6.
Operating the Remote Control Unit
The following functions are available with the use of the remote control unit.

䡵Remote control receiving range

The receiving range is about 5m.
The vertical plane is ± 15˚ and the horizontal plane is ± 30˚.
CAMERA FREEZE EXT-IN
AUTO
AUTO
AUTO
WHITE
BRIGHT
IMAGE SEL.
FOCUS
OUT IN
SD CARD
ZOOM

31 2

4

5

6

7

8

Up down ± 15˚
Left right ± 30˚
5m