JVC AV29A10EU manual EXT Setting, S-VIDEO input, ID List

EXT SETTING

	EXT SETTING
	EXT-1
	EXT-3	DUBBING
		EXT-2
	EXT-4
	TV
	BACK	ID LIST
TV	OK
		S-IN

D0020-EN

To display EXT SETTING menu:

1 Press the a button to display MENU (main menu).

2 Press the 6 button to choose EXT SET- TING. Then press the abutton.

■S-IN (S-VIDEO input)

When connecting a device (such as S-VHS VCR) which ena- bles an S-VIDEO signal (Y/C signal) to be output, you can en- joy high-quality picture of the S-VIDEO signal (Y/C signal).

Preparation:

•At first, read the Device Instruction Manual and “ADDITION- AL PREPARATION” on page 31 to connect the device to the TV properly. Second, follow the Device Instruction Manual to set the device so that a S-VIDEO signal (Y/C signal) can be output to the TV.

•Do not set S-IN (S-VIDEO input) to the EXT terminal con- nected to a device which cannot output a S-VIDEO (Y/C sig- nal). If it is set wrongly, a picture cannot appear.

1Press the 6 buttons or 5 buttons to choose an EXT terminal.

2Press the yellow button and set the S-IN (S- VIDEO input).

A y(S-VIDEO input) mark is displayed. You can view an S-VIDEO signal (Y/C signal) instead of the regular video signal (composite signal).

To cancel the S-IN (S-VIDEO input) setting:

Press the yellow button and turn off y (S-VIDEO in- put) mark. The regular video signal (composite signal) pictures are resumed.

3Press the a button to complete the set- ting.

The menu disappears.

Note:

•The EXT-1 terminal does not support S-VIDEO signal (Y/C signal) and you cannot set S-IN (S-VIDEO in- put) in the EXT-1 terminal.

•Setting S-IN (S-VIDEO input) changes the head character from “E” to “S”. For example, “E2” is changed to “S2”.

•Even an device which enables the S-VIDEO signal (Y/ C signal) to be output may output a regular video sig- nal (composite signal) depending on the device set- ting. If a picture cannot appear because S-IN (S- VIDEO input) setting has been made, read the device Instruction Manual carefully again to check for the de- vice settings.

■ID LIST

You can have a name corresponding to the devices connect- ed for each EXT terminal. Giving a name to an EXT terminal makes the EXT terminal number appear on the screen, to- gether with the name.

1Press the 6 buttons or 5 buttons to choose an EXT terminal.

2Press the blue button to display the name list (ID LIST).

	EXT SETTING
	EXT-1		ID LIST
	EXT-3	DUBBING	VHS
		EXT-2	S-VHS
			DVC
	EXT-4		SAT
			STB
	TV		GAME
			LD
			DVD
	BACK		8mm
			Hi-8
TV	OK

D0021-EN

3Press the 6 buttons to choose a name. Then press the abutton.

The ID LIST disappears and the name is assigned to the EXT terminal.

To erase a name assigned to the EXT terminal:

Choose a blank space.

4Press the a button to complete the set- ting.

The menu disappears.

Note:

•You cannot assign an EXT terminal name not found in the name list (ID LIST).

ENGLISH

19