JVC AV29A10EU manual Connecting Speakers/Ampli Fier, Link compatible VCR, Connecting headphones

ADDITIONAL PREPARATION

Devices which can output the S-VIDEO signal (Y/C signal) such as a S-VHS VCR

Connect the device to an EXT terminal other than the EXT-1 terminal.

You can choose a video input signal from the S-VIDEO signal (Y/C signal) and regular video signal (composite signal). For details of how to operate the device, see “S-IN (S-VIDEO in- put)” on page 19.

T-V LINK compatible VCR

Be sure to connect the T-V LINK compatible VCR to the EXT-2 terminal. If not, the T-V LINK function will not work properly.

Note:

•When connecting a T-V LINK compatible VCR to the EXT-2 terminal, be sure to connect the Decoder to the VCR. If not, the T-V LINK function may not work properly. After you have registered TV channels to the Programme numbers (PR), set the DECODER (EXT-2)function for the Programme number (PR) to ON in order to unscramble a scrambled TV channel. For details of operation, see “Us- ing the DECODER (EXT-2) function” on page 29.

Connecting headphones

Connect the headphones with a stereo mini-jack (of 3.5mm in diameter) to the headphone jack at the TV front panel.

Note:

•When you connect the headphones, the TV speakers is- sue no sound.

Video/sound signal output from the EXT-2 terminal

You can arbitrarily change over the output of the video/sound signal from the EXT-2 terminal. It is useful when you want to dub the video/sound from another device on the VCR con- nected to the EXT-2 terminal. For details on how to do this op- eration, see “DUBBING” on page 20.

TV output from the EXT-1 terminal

The output of video/sound signal of a TV channel you are cur- rently viewing is always output from the EXT-1 terminal.

Note:

•Changing over a Programme number (PR) also changes over the TV output from the EXT-1 terminal.

•The video/sound signal from an EXT terminal cannot be output.

•Teletext programmes cannot be output.

■Connecting Speakers/Ampli-

fier

While referring to the Audio equipment connection diagram, connect the audio equipment you desire to the TV.

You can use external front speakers to listen to the TV sound instead of the TV speakers. For details of how to operate them, see “Setting the SPEAKER function” on page 30.

Before connecting anything:

•Read the manuals provided with the amplifier and speak- ers.

•Turn the TV and Amplifier off.

•To prevent magnetism from the speakers adversely ef- fecting the TV screen, use magnetic-shielded speakers for the front speakers.

•Note that connecting cables are not supplied.

Back of the TV L R

L

R

AUDIO OUT

1Amplifier

2Front speakers (Magnetic-shielded type)

Note:

•The output from the AUDIO OUT terminal is not interrupt- ed by headphone connection to the TV. You cannot cut the sound from the front speaker even if you connect a headphone to the TV.

32