INSTALL
2Press the green button and start the IN- SERT function.
EDIT
PR |
| ID | CH / CC | |
| ||||
AV |
| BBC1 |
|
|
01 |
| CH | 21 | |
02 |
|
| CH | 22 |
03 |
|
| CH | 23 |
04 |
|
| CH | 24 |
05 |
|
| CH | 25 |
06 |
|
| CH | 26 |
07 |
|
| CH |
|
08 |
|
| CC | 02 |
09 |
|
| CC | 03 |
BACK
TV 
OK 0 9
CH / CC
3Press the 6 buttons to choose “CC” or “CH” according to the CH/CC number of the TV channel.
When the COUNTRY setting is FRANCE:
Choose “CH1”, “CH2”, “CC1” or “CC2”.
To cancel the INSERT function:
Press the h(Information) button.
4Press the Number buttons to enter the re- maining CH/CC number.
The TV shifts to registration mode.
When the registration is completed, the picture of the TV channel appears on the screen.
Note:
•The CH/CC number is a number indicating the broadcast frequency to the TV. If the TV cannot de- tect the TV channel corresponding to the broadcast frequency indicated by the CH/CC number, a pic- ture in the
DELETE
1 Press the 6 buttons to choose a TV channel.
Every time you press the 6 buttons, the Programme number (PR) is changed over, and the picture of the TV channel registered in the Programme number (PR) ap- pears on the screen.
2Press the yellow button to delete the TV channel.
The TV channel is deleted from the Programme num- bers (PR) list.
MANUAL
Preparation:
•As long as you register the TV channel
2Press the blue button to activate the MAN- UAL function.
At the right side following the CH/CC number, the SYS- TEM (broadcasting system) of the TV channel appears.
MANUAL
PR |
| ID | CH / CC |
|
| ||||
AV |
| BBC1 |
|
|
|
|
| ||
01 |
| CH | 21 |
|
| ||||
02 |
|
|
|
| CH | 22 |
|
| |
03 |
|
|
|
| CH | 23 |
|
| |
04 |
|
|
|
| CH | 24 |
|
| |
05 |
|
|
|
| CH | 25 |
|
| |
06 |
|
|
|
| CH | 26 |
|
| |
07 |
|
|
|
| CC | 01 | (B / G) |
| |
08 |
|
|
|
| CC | 02 |
|
| |
09 |
|
|
|
| CC | 03 |
|
| |
|
|
|
|
|
|
|
|
|
|
| BACK |
|
|
| SEARCH+ | ||||
|
|
|
| SEARCH- | |||||
|
|
|
| ||||||
TV |
| OK |
|
|
| FINE+ | |||
|
|
| |||||||
| SYSTEM |
|
|
| FINE- | ||||
|
|
| |||||||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
To cancel the MANUAL function:
Press the h (Information) button.
3Press the 3 button to choose the SYSTEM (broadcasting system) for a TV channel you want to register.
TV channel (SECAM-L system) from a French station:
Set the SYSTEM to “L”. If it is set to one other than “L”, you cannot receive the TV channel of the
Other TV channels:
If you do not know the correct broadcasting system, set the SYSTEM to “B/G”. If “B/G” is not correct, it results in the fact that you will not hear the sound normally when the TV detects a TV channel. In this case, retry to set the SYSTEM again correctly so that no problem arises.
4Press the green or red button to search for
a TV channel.
Scanning stops when the TV finds a TV channel. Then the TV channel is displayed.
5Press the green or red button repeatedly until the TV channel you want appears.
If the TV channel reception is poor:
Press the blue or yellow button to
If you cannot hear the normal sound even when the picture of the TV channel appears normal- ly:
The SYSTEM setting is wrong. Press the 3 button and choose a SYSTEM that has normal sound.
6Press the a button and register the TV
channel to a Programme number (PR).
The normal EDIT menu is resumed.
1Press the 6 buttons to choose a Pro- gramme number (PR) to which you want to
