54
The remote control includes illuminated buttons for key features like CH+/- and VOL+/-. Press the LIGHT button
to turn the illumination on. The illumination will shut off automatically after a few seconds.

Light

The AV-61S902 can receive signals from a variety of sources. Use the INPUT button
to select the signal source: Antenna (for signals from the RF coaxial cable) or
VIDEO 1 through VIDEO 4 (for signals from an audio/video device like a DVD player
or VCR) or DIGITAL-IN.
The INPUT menu will appear when you press INPUT. To select a signal source, press
INPUT, each press will move to the next item in the menu. If no device is connected
to an input, a blue screen will appear. When you have selected a signal source,
either press EXIT to leave the menu or wait a few seconds for the menu to disappear
automatically.
• You cannot use the 5
∞
arrows to access items from the menu.
• Pressing CH+/- will automatically select the antenna (A 01) as the source.

Input

Menu (on TV’s front panel)

INPUTA 01VIDEO-1VIDEO-2VIDEO-3 VIDEO-4 DIGITAL-IN
INPUT Menu
You can also access the onscreen menu system by pressing the MENU button on the television’s front panel.
When you press this button, an additional onscreen menu will appear.
This menu will show the current channel (07 on the menu shown above), the current signal input in use
(TV antenna) and the current aspect ratio (FULL). You can move to the other onscreen menus by pressing the
5∞
arrows.
FRONT PANELMenu

FRONT PANEL CONTROL

INPUT

ASPECT FULL

TV

CHANNEL

NEXT PAGE

OPERATE FRONT KEY

SELECT BY FRONT KEY

A 07

BY

Button Functions