Preparing for Dolby Surround
English
SURROUND
The amplifier memorizes two sets of Dolby Surround adjustments; one for Pro Logic and the other for 3ch Logic.
On the front panel:
1. Press SURROUND so that the Control % / Þbuttons work for selecting the surround modes.
The lamp above the button lights up.
2. Press Control %/ Þ until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the display.
The PRO LOGIC or 3CH LOGIC indicator also lights up.
Each time you press the button, the surround modes change as follows:
PROLOGIC 3CHLOGIC HALL
OFF
The indicator of the selected surround mode lights up in turn as you select the surround modes.
PROLOGIC | Select this mode when you use a center speaker and rear speakers. |
|
|
3CHLOGIC | Select this mode when you use a center speaker without rear speakers. |
|
|
HALL | This is JVC’s original surround mode, and is different from Dolby Surround. To use |
| this, see page 17. |
|
|
OFF | Select this to turn off the surround mode. |
|
|
ADJUST | 3. | Press ADJUST so that the Control %/ Þ/ @/ # buttons work for adjusting the selected |
|
| surround mode. |
|
| The lamp above the button lights up. |
| 4. | Press Control %/ Þ until “CNT MODE” (Center Mode) appears on the display. |
5. Press Control @/ # to select the center mode.
Each time you press the button, the center modes change as follows:
WIDE NORMALPHANTOM
OFF
WIDE | Select this mode when the center speaker can reproduce the bass better than the front |
| speakers. All signals of the center channel are output through the center speaker. |
NORMAL | Select this mode when the center speaker cannot reproduce the bass better than the |
| front speakers. The bass portions of the center channel signals are output through the |
| front speakers. |
PHANTOM | Select this mode when you do not use a center speaker. The center speaker channel |
| signals are output through the front speakers. |
|
|
OFF | Select this mode to turn off the center speaker channel. |
|
|
Notes:
•If you have already set the center speaker size following the procedure described on page 13, you do not have to select the center mode in this procedure.
•When you have selected “3CHLOGIC,” you cannot select “PHANTOM.”
Continue to the next page
Page 20