SURROUND
ON/OFF
AUDIO
CONTROL
SURR MODE
6
DELAY
5
TEST
4
–REAR +
8 9
– CENTER +
10 +10
TEST
4
From the remote control:
If you have already set the center speaker size following the procedure described on page 13, you can use the remote control for Dolby Surround preparation.
1.Press SURROUND ON/OFF so that one of the surround mode indicators (PRO LOGIC, 3CH LOGIC, HALL) lights up on the display.
The previous mode is recalled (at its previous settings) and is shown on the display. Each time you press the button, the surround mode turns on and off.
2.Press AUDIO CONTROL so that 10 keys work for adjusting the sound.
3.Press SURR MODE until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the display.
Each time you press the button, the surround modes change as follows:
PROLOGIC 3CHLOGIC HALL
The indicator of the selected surround mode lights up in turn as you select the surround modes.
4.Press DELAY to adjust the delay time of the rear speaker output. Each time you press the button, the delay time changes as follows:
DELAY 1 DELAY 2 DELAY 3
Note:
When you have selected “3CHLOGIC,” you cannot adjust the delay time.
5.Press TEST to start checking the speaker output balance.
“TEST” starts flashing on the display, and a test tone comes out of the speakers in the following order:
Left front |
| Center |
| Right front |
speaker |
| speaker |
| speaker |
Rear speakers
Notes:
•No test tone comes out of the rear speakers when you have selected “3CHLOGIC.”
•No test tone comes out of the center speaker when you select “PHANTOM” or “OFF” for the center mode.
6.If necessary, adjust the speaker output balance as follows:
•To adjust the rear speaker output level, press
•To adjust the center speaker output level, press CENTER
Pressing – decreases the output level up to
Pressing + increases the output level up to +10 dB.
Notes:
•The sound levels of the left and right rear speakers will be the same.
•You cannot set the sound level of the rear speakers when you have selected “3CHLOGIC.”
•You cannot set the sound level of the center speaker when you select “PHANTOM” or “OFF” for the center mode.
7.Press TEST again to stop the test tone.
English
Page 22