JVC BR-DV3000E Backup recording function, Recording using the serial remote terminal, panel to DV

RECORDING	– Backup recording function					–
By linking this unit to other DV devices, this unit can perform continuous, long-hour recording.
This unit can be set as a backup unit connected to a DV camcorder (GY-DV300/DV500/DV550/
DV5000, etc.). When the recording tape of the source unit ends, this unit can start recording.
This enables long-hour recording.
			Backup unit: the main unit
			OPERATE				EJECT
							MENIU
			Mini	A.DUB	REC	PLAY	PAUSE
					DVCAM NTSC PAL REC INH.
	DV cable		PROFESSIONAL		CH-1/3
							SET
			MIC REMOTE SEL.	INPUT SEL.	REW	STOP	FF
			SERIAL	LINE	CH-2/4
	DV terminal	DV terminal	9PIN WIRELESS	DV Y/C	BR-DV3000
			INPUT SEL. switch

RECORDING

–

Recording using the serial remote terminal –

Recording can be turned ON/OFF with the serial remote controller or the footswitch connected

to the SERIAL REMOTE terminal on the rear panel.

SERIAL REMOTE terminal

OPERATE

EJECT

MENIU

DV IN/OUT

Mini

A.DUB

REC

PLAY

PAUSE

AUDIO

LINE

VIDEO

Y/C

CH 1/3 CH 2/4

DVCAM NTSC PAL

REC INH.

IN

PROFESSIONAL

CH-1/3

REMOTE

SET

DC12V

MIC REMOTE SEL.

INPUT SEL.

CH-2/4

REW

STOP

FF

OUT

NTSC/PAL

SERIAL

LINE

9PIN WIRELESS

DV Y/C

BR-DV3000

9PINSERIAL NTSC PAL

REMOTE SEL. switch

Connection
Connect the DV terminal of the source unit to the
DV terminal of this unit with a DV cable.
Setting up this unit
Set the INPUT SEL. switch on the front
panel to DV.
Set the BACKUP REC TIME item of the
SYSTEM (1/2) menu.
Use the following settings according to the length
of the tape of the source unit.
For DV or mini DV cassettes:
25MIN	: 30-minute tape
55MIN	: 60-minute tape
75MIN	: 80-minute tape
115MIN	: 120-minute tape
175MIN	: 180-minute tape
265MIN	: 270-minute tape
OFF	: No backup recording

Set the TC DUPLICATE item of the TIME CODE menu to OFF.

•	It records the data of the built-in time code
	generator or the built-in clock.
•	When the TC DUPLICATE menu item is set to
	AUTO or NON DROP, the time code of the DV
	camcorder will stop advancing. If the DV cable
	is disconnected, the time code of the backup
	recording will stop advancing.

Operation 1. Recording begins on the source unit.

	* Please record from the beginning of the re-
2.	cording tape.
	This unit begins recording when the
	tape of the source unit is near the end
	(about 5 minutes before the end of the
	tape).
	• This unit begins recording when the record-
	ing time of the source unit reaches the time
	configured by the BACKUP REC TIME set-
	ting.

Memo

• Backup recording records the video and sound from the source unit to the main unit. While this unit is performing backup recording, please continue shooting from the source unit.

• The audio mode is the mode configured in the source unit. (32k/48k)

• Please set the BACKUP REC TIME item to OFF if the unit is not performing backup recording.

REMOTE (1/2) menu
	– – – R E M O T E [	1	/ 2	] – – –
R E M O T E				O N
L O C A L F U N C T I O N				A L L	K E Y S
P R E R O L L				5 S
R E M	F F / R E W M O D E			F F / R E W
R E M S T O P S E L				E E
P B S T A R T D E L A Y				O F
S Y N C H R O N I Z A T I O N				O N
N E X T	P A G E
P A G E	B A C K

Memo

•The serial remote control- ler can perform operations other than recording.

•The buttons on the unit to be rendered operable can be set via the LOCAL FUNCTION item of the RE- MOTE(1/2) menu.

REMOTE (2/2) menu
	– – – R E M O T E [	2	/ 2 ] – – –
C O N T R O L L E R S E L			T Y P E 1
F O O T	S W		O F F
P A G E	B A C K

• Serial remote controller: RM-G30 • Footswitch

Connection
Connect the serial remote controller (available separately: RM-G30)
or the footswitch to the SERIAL REMOTE terminal on the rear panel.
Setting
Set the REMOTE SEL. switch on the front panel to SE-
RIAL.
Set the REMOTE item of the REMOTE (1/2) menu to
ON.
Set the FOOT SW item of the REMOTE (2/2) menu ac-
cording to the way in which the serial remote terminal
is used.
OFF	: Set to OFF when the serial remote controller is used.
L EDGE	The footswitch cannot be used.
	: Recording and recording pause operations are
H EDGE	switched at the LOW edge of the footswitch signal.
	: Recording and recording pause operations are
L LEVEL	switched at the HIGH edge of the footswitch signal.
	: Record at the LOW edge and pause recording at the
	HIGH edge of the footswitch signal.
Operation
Before using the footswitch, first engage the recording or recording
pause mode via the buttons on the main unit.
Memo
• The footswitch can only be used for switching the recording
operation ON/OFF.
• The footswitch functions irrespectively of the REMOTE SEL
switch settings.

40 41