JVC BR-DV3000E Repeat playback, Selecting playback audio output, Repeat operation, ginning, Memo

PLAYBACK – Repeat playback –

PLAYBACK – Selecting playback audio output –

This unit is capable of 3 types of repeat playback.

The repeat playback function is set via the REPEAT MODE item of the SYSTEM (1/2) menu.

The output mode for

audio playback can be selected with the remote controller.

SYSTEM (1/2) menu
	– – – S Y S T E M [ 1			/ 2	] – – –
S T L /	F .	A D V			2 N D
B A C K U P		R E C	T I M E		O F F
L O N G	P A U S E		T I M E		5 M I	N
L O N G	P A U S E		M O D E		F . A D V

Setting

REPEAT MODE item of the SYSTEM (1/2) menu

DISPLAY

STILL

BARS MODE BLANK

To turn the audio muting function ON/ OFF or to mute the EE audio, press the AUDIO MUTING button.

To resume the audio output, press the button again.

I N D E X	W R I	T E	O N
R E P E A T M O D E			B L A N K
N E X T	P A G E
P A G E	B A C K

OFF	:No repeat playback
INDEX	:Repeat playback between positions where index sig-
	nals are recorded.
VIDEO END :Repeat playback from the beginning of the tape to
TAPE END	the position where video signal recording ends.
	:Repeat playback from the beginning to the end of
	the tape.

		AUDIO
MENU	SEARCH+	MUTING
		OUT SEL.
	SET
	SEARCH–	OUT LEV.
A.DUB	PAUSE	REC
F.REV	PLAY	F.ADV

AUDIO MUTING button

OUT SEL button

OUT LEV button

Selecting the audio output channel for playback of tapes recorded in the 32kHz mode.

Each time the OUT SEL. button is pressed, the channel changes in the following sequence:

CH1/CH2 CH3/CH4 MIX

INDEX repeat playback

•If no index signal is de- tected during playback, the tape will run till the end. If no index signal is detected during rewind, the tape will rewind till the beginning.

•If the interval between in- dex signals is less than 1 minute, the function may not work well.

Memo

If there is dust adhered to the head, repeat playback may not work well.

Operation
1.	Press the REW button and rewind the tape to the be-
	ginning.
2.	Press the PLAY button to begin replay.
	¥ When it reaches the position set at the REPEAT MODE menu
	item, the tape rewinds and plays back again.
To abort the repeat playback function, press the STOP
button.
	Repeat operation
		TAPE END
		VIDEO END
		INDEX
		Playback
		Rewind
		Index signal	Index signal

REW	FF
	STOP
INDEX–	INDEX+

REMOTE CONTROL UNIT

RM-G3000

Memo

•The output channel for playback audio of tapes recorded in the 32kHz mode can also be set via the AUDIO OUT SEL item of the AUDIO/ VIDEO menu of the main unit.

•The audio output level can be set via the AU- DIO OUT LEVEL item of the AUDIO/VIDEO menu.

☞ Page 61 “AUDIO/VIDEO menu”

•CH3/CH4: CH3 audio is output via the CH1/3 AUDIO OUT terminal whereas CH4 audio is output via the CH2/4 AUDIO OUT terminal.

•MIX: Sounds mixed from CH1 and CH3 are output via the CH1/3 AUDIO OUT terminal whereas Sounds mixed from CH2 and CH4 are output via the CH2/4 AUDIO OUT terminal.

Note

Depending on the sound source, noise may oc- cur in the MIX mode. In this case, please use CH1/CH2 or CH3/CH4.

Select the output level for audio play- back

Each time the OUT LEV button is pressed, the standard level for the output audio level changes. (NORMAL or ATT)

•To play back tapes recorded at a standard level of –12dB (using a consumer DV device), set the output level to ATT. In so doing, the audio output level decreases.

•To play back tapes recorded on this unit, set

Beginning of tape End of tape

the output level to NORMAL.

48 49