Contents of the menus - continued, SYSTEM Menu continued

MENU SCREEN		– Contents of the menus – (continued)
SYSTEM Menu (continued)
Items	Setting		Contents
INDEX WRITE	OFF	Use this setting to enable/disable index signal recording.
	ON	OFF	: No recording of index signal.
		ON	: Use this setting to record index signals. An index signal is
			automatically registered at the position where recording
			starts.

The REMOTE menu consists of 2 menus. (1/2 and 2/2 menu)

Items	Setting	Contents
REMOTE	OFF	Use this menu item to enable/disable the REMOTE SEL. switch on
	ON	the front panel.
		OFF : Disables the 9 PIN/SERIAL setting of the REMOTE SEL.

Use this setting to enable/disable repeat playback.
OFF	: No repeat playback
INDEX	: Repeat playback between the positions where in-
	dex signals are recorded.
VIDEO END	: Repeat playback from the beginning of the tape to
	the position where recording of video signals ends.
TAPE END	: Repeat playback from the beginning to the end of
	the tape.

		switch.
		ON : Enables the 9 PIN/SERIAL setting of the REMOTE SEL.
		switch. Use this setting when remote controlling the unit via
		the 9 PIN and SERIAL terminal.
LOCAL	NO KEY	Use this to select the buttons on the main unit to be rendered oper-
FUNCTION	EJECT	able when remote controlling the unit via the 9 PIN REMOTE ter-
	STP + EJT	minal or the SERIAL REMOTE terminal.
	ALL KEYS	NO KEY	: No button enabled.

NEXT PAGE	Display the SYSTEM (2/2) menu.
PAGE BACK	Return to the TOP MENU.

Items	Setting		Contents
DC IN MODE	OPE OFF	Select the action to perform when power is supplied via the DC IN
	OPE ON	terminal.
	PLAY	OPE OFF	: Sets the unit to OPERATE OFF
		OPE ON	: Sets the unit to OPERATE ON.
		PLAY	: If a tape has been inserted, the VTR will go into the

				PLAY mode. (AUTO PLAY)
OPERATION	OFF	Turn ON/OFF the OPERATION LOCK.
LOCK	ON	OFF : Turns off the OPERATION LOCK and enables the buttons
			on the main unit.
		ON : VTR goes into the OPERATE LOCK mode. The buttons and
			the slide switch on the main unit are inhibited. However,
			OPERATE ON and menu operations are still possible.
			Memo
		Even when this setting is OFF, disabling the buttons on the main
		unit while it is controlled via a remote controller connected to the 9
		PIN REMOTE or SERIAL REMOTE terminal is possible, by setting
		the LOCAL FUNCTION item of the REMOTE menu.
PAGE BACK		Return to the SYSTEM (1/2).

		EJECT	: Only the EJECT button enabled.
		STP + EJT : Only the STOP button and the EJECT button are ena-
			bled.
		ALL KEYS : All operation buttons are enabled.
		Memo
		If the OPERATION LOCK item of the SYSTEM (2/2) menu is set
		as ON, the buttons on the main unit will be disabled regardless of
		the setting here.
PREROLL	3SEC	When remote controlling the unit via the 9 PIN REMOTE terminal,
	5SEC	use this item to set the PREROLL time of the unit. Configurations
	7SEC	done via the editing remote controller prevail over other settings.
	10SE	3SEC	: 3 seconds
		5SEC	: 5 seconds
		7SEC	: 7 seconds
		10SEC	: 10 seconds
		Memo
		To enhance editing precision, please set it to at least 7 seconds.
REM FF/REW	FF/REW	Use this menu item to set the action to be performed when an FF/
MODE	SEARCH	REW command is received via the 9 PIN REMOTE terminal or DV
		terminal.
		FF/REW	: Sets the unit to execute FF/REW when a command is
			received. This is the usual setting.
		SEARCH : Sets the unit to go into the SEARCH state when a
			command is received. Use this setting if the locate(cue
			up) function does not work well.

JVC BR-DV3000E Contents of the menus - continued, SYSTEM Menu continued, REMOTE menu, Menu Screen