JVC BR-DV6000E RECORDING- Backup recording function,
For using GY-DV5000 as the source unit

RECORDING– Backup recording function –

In combination with DV equipment, BR-DV6000 can perform continuous, long-hour recording. BR-DV6000 can be set as the backup unit connected to a DV camcorder (GY-DV300/DV500/DV550/ DV5000, etc.). When the recording tape of the source unit nears its end, BR-DV6000 can start

recording, enabling long-hour recording. Backup unit: BR-DV6000

DV cable

DV terminal DV terminal

:Connection:

								OPERATE
Mini	MENU	DISP	RESET	PROFESSIONAL	A.DUB		REC	PLAY	PAUSE
	SEARCH–	SET	SEARCH+
					EJECT		REW	STOP	FF
MIC	HOLD	BLANK	CUE UP
	PHONES	REC LEVEL					AUDIO	INPUT	REMOTE
					COUNTER MONITOR OUTPUT SELECT
					CTL	L	CH-1/2	DV
					TC	MIX	MIX	LINE
		CH-1/3	CH-2/4	BR-DV6000	UB	R	CH-3/4	Y/C	LOCAL
								(CPN)

Connect the DV terminal of the source unit to the DV terminal of BR-DV6000 with a DV cable.

:Setting up BR-DV6000:

Set the INPUT SELECT switch on the front panel to “DV”.

Set the REMOTE/LOCAL switch on the front panel to “REMOTE”.

Set BACKUP REC TIME in the SYSTEM (1/2) Menu screen.

Use the following settings according to the tape length of the source unit.

*For DV or mini DV cassette tape:

25MIN	: 30-minute tape
55MIN	: 60-minute tape
75MIN	: 80-minute tape
115MIN	: 120-minute tape
175MIN	: 180-minute tape
265MIN	: 270-minute tape
OFF	: No backup recording

Memo

With REPLICATION in the SYSTEM (2/2) menu screen set to “DV”, BACKUP REC TIME is fixed to “OFF”. For using the backup record- ing function, set REPLICATION to “OFF” or “SERIAL”.

INPUT SELECT switch

REMOTE/LOCAL switch

:Operation:

1. Recording begins on the source unit.

❈Ensure that recording starts from the begin- ning of the recording tape.

2.BR-DV6000 begins recording when the tape of the source unit nears its end (about 5 min- utes before the end of the tape).

• BR-DV6000 begins recording when the re- cording time of the source unit reaches the time set by BACKUP REC TIME.

Memo

•In backup recording, BR-DV6000 records video/sound from the source unit.

While this unit is performing backup record- ing, continue shooting from the source unit.

•The audio mode is the one selected in the source unit. (32 K/48 K)

•Set BACKUP REC TIME to “OFF” if the unit is not performing backup recording.

Set the REMOTE SEL DV in the RE- MOTE (1/2) Menu screen to ON or LOC+REM.

Set TC DUPLICATE in the TC/UB/ CLOCK (1/2) Menu screen to OFF.

•It records the data of the built-in time code generator.

•When TC DUPLICATE is set to AUTO, the time code of the DV camcorder will stop ad- vancing. If the DV cable is disconnected, the time code of the backup recording will stop advancing.

For using GY-DV5000 as the source unit

Set DV REC TRIGGER in the OTHERS (1/2) Menu screen of GY-DV5000 to OFF.

E-45