English
Adjusting the Voltage Selector
Before plugging in the unit, set the correct voltage for your area with the voltage selector on the rear of the unit.
AUX IN
| MAIN SPEAKER | SUBWOOFER | |
| [ | ] | |
| L |
| L |
| R |
| R |
110 | 0 |
|
|
| 24 |
|
|
12 | - |
|
|
7 |
|
| |
| 220 |
|
|
VOLTAGE |
|
| |
SETTING |
|
| |
110 |
|
|
127 | 230 | - |
| 220 |
|
VOLTAGE
SETTING
Use a screwdriver to rotate the voltage selector so the voltage number the voltage mark is pointing at is the same as the voltage where you are plugging in the unit. (See the back cover page.)
DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.
NOW, you can plug in the unit and other connected equipment FINALLY!
Canceling the Display Demonstration
When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.
On the unit ONLY:
To cancel the display demonstration, press | CANCEL |
/DEMO | |
CANCEL/DEMO. |
|
When you press other buttons
The display demonstration stops temporarily. It will start automatically again (if no operation is done for 2 minutes) until you cancel it by pressing CANCEL/DEMO.
To start the display demonstration manually
Press and hold CANCEL/DEMO again for more | CANCEL |
than 2 seconds. | /DEMO |
|
– 9 –
