Continued
English
For CA-MXGT700:
To remove the speaker grilles
The speaker grilles are removable as the illustration below.
Projections |
Connecting Other Equipment
You can connect both analog and digital equipment.
•DO NOT connect any equipment while the power is on.
•DO NOT plug in any equipment until all connections are complete.
To connect an analog component
Be sure that the plugs of the audio cords are color coded: White plugs and jacks are for left audio signals, and red ones for right audio signals.
Holes | Speaker grille |
To audio output
AUX IN
Audio/video equipment
To remove the speaker grille, insert your fingers around the projection at the top of the speaker grille, then pull gently towards you by holding the side. Do the same for the rest of projections each at a time.
To attach the speaker grille, put the projections of the speaker grille into the holes of the speaker.
For playing the other equipment through this unit,
connect between the audio output jacks on the other equipment and AUX IN jacks by using audio cords (not supplied).
To connect audio equipment with an optical digital input terminal
You can record CD sound onto the connected digital equipment.
DIGITAL OUT (OPTICAL)
Protective plug
Before connecting the other equipment, remove the protective plug from the terminal.
|
| Audio equipment | |||
To optical |
| with an optical digital | |||
| input | ||||
digital input |
|
|
|
|
|
|
|
|
|
| |
|
|
|
| ||
Connect an optical digital cord (not supplied) between the optical digital input terminal on the other equipment and the DIGITAL OUT [OPTICAL] terminal.
– 8 –
