NOTICE: To avoid scratching the palm rest when replacing the keyboard, hook the tabs along the front edge of the keyboard into the palm rest, and then press on the right edge near the top to snap the keyboard into place before replacing the two screws.
Wireless Mini-Card
If you ordered a
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.
1 Follow the procedures in "Before You Begin" on page 109.
2 Remove the hinge cover. See "Hinge Cover" on page 118.
3 Remove the keyboard. See "Keyboard" on page 119.
4 If a
a Disconnect the two antenna cables from the
1 2
3
1 | 2 | antenna cables (2) | 3 | antenna cable connectors (2) |
Adding and Replacing Parts