JVC CA-MXGT700 manual Basic CD Operations

English

3 Press one of the disc number buttons (CD1, CD2 or CD3) for the disc you want to start to play from.

CD 1 CD 2 CD 3

Basic CD Operations

While playing a CD, you can do the following operations.

To exchange CDs during playback of another

CD play starts from the first track of the selected disc.

•Pressing CD 6instead of the disc number buttons starts playing back if a CD is on the trays.

To stop during play, press 7.

To remove the disc, press 0.

CD playback sequence

When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.

•When CD1 is pressed : CD1 ] CD2 ] CD3 (then stops)

•When CD2 is pressed : CD2 ] CD3 ] CD1 (then stops)

•When CD3 is pressed : CD3 ] CD1 ] CD2 (then stops)

*When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped.

One Disc play

When 2 or 3 CDs are loaded on the disc trays, you can select one particular disc to be played back.

Press DISC CHANGE to change the CD and the DISC CHANGE carrousel comes out.

If you change CDs during play, the current play will not stop until all CDs you have changed are played.

To close the carrousel, press DISC CHANGE or 0.

To skip to the another CD in the carrousel

Press DISC SKIP on the remote control.	DISC
	SKIP

To stop play for a moment

Press CD 6.

While pausing, “PAUSE” appears on theCD display.

To resume play, press CD 6 again.

1 Load CDs.

•If the current playing source is not the CD player, press CD 6, then 7 before going to the next step.

2 Press REPEAT repeatedly so that the
	REPEAT	PROG
1 DISC indicator lights up on the
display.

To locate a particular point in a track

During play, press and hold 1or ¡.

•1: Fast reverses the disc.

•¡: Fast forwards the disc.

When using the remote control, press and hold 4/1 or ¢/¡.

To go to another track

Press 4 or ¢ repeatedly before or during

playback.

• Each time you press the button, the indication on the

• 4: Goes back to the beginning of the current

or previous tracks.

display changes as follows:

• ¢: Skips to the beginning of the next or succeeding

ALL DISC

1 DISC

REPEAT 1*

tracks.

(initial setting)

When using the remote control, press 4/1or ¢/¡

REPEAT ALL DISC*

REPEAT 1 DISC*

before or during playback.

* See page 17.

3 Press one of the disc number

1

2

3

If you press and hold 4 or ¢ on the unit before

buttons (CD1, CD2 or CD3) you

CD

CD

CD

playing

want to listen.

The track number keeps changing until you release it.

Playback stops when all tracks of the

selected disc are played once and resumes

To go to another track directly using the number

to All Disc play.

buttons

To stop during play, press 7.

Pressing the number button(s) before or during play allows

To remove the disc, press 0.

you to start playing the track number you want.

To exit from One Disc play, press REPEAT repeatedly so

Ex.: For track number 5, press 5.

1

2

3

For track number 15, press +10,

that ALL DISC indicator lights up on the display.

4

5

6

then 5.

The following operations will also cancel the One Disc

For track number 20, press +10,

7

8

9

then 10.

play and restore All Disc play when—

10

+10

For track number 32, press

•

Turning off the power,

+10, +10, +10, then 2.

•

Ejecting the carrousel, or

•

Changing the source to play.

– 15 –