JVC CA-MXGT88 Using the Timers, Using Daily Timer, repeatedly until “DAILY”, Before you start

Using the Timers

There are three timers available—Daily Timer, Recording Timer, and Sleep Timer.

Before using the timers, you need to set the clock built in the unit. (See “Setting the Clock” on page 9.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the on-time comes (the indicator flashes while the timer is operating). Then, when the off-time comes, the unit automatically turns off (stands by).

Daily Timer works every day unless you cancel it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting timer, press CANCEL/DEMO. (However, this does not always work. If CANCEL/DEMO does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)

Before you start...

•When using a CD as the source to play:

—Make sure there is a CD on the currently selected disc number tray.

•When using a tape as the source to play:

—Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

•When using the external component as the source to play:

—Set the timer equipped with the external component at the same time.

On the unit ONLY:
1 Press CLOCK/TIMER
	CLOCK
repeatedly until “DAILY”	/ TIMER
appears on the display.

indicator lights up and the DAILY (daily timer) indicator starts flashing on the display.

WOOFER

•Each time you press the button, the clock/timer setting modes change as follows:

DAILY	ON TIME		REC
	(Daily Timer)
Canceled	CLOCK	ON TIME

(See page 9.) (Recording Timer)

2 Press CLOCK/TIMER again.
	/ TIMER
	CLOCK
“ON TIME” appears for 2 seconds, then

the unit enters on-time setting mode.

WOOFER

3 Set the on-time you want the unit to turn on.

1)Turn the 4/¢ control to set the hour, then press SET.

2)Turn the 4/¢control to set the minute, then press SET.

“OFF TIME” appears for 2 seconds, then	SET
the unit enters off-time setting mode.

4 Set the off-time you want the unit to turn off (on standby).

1)Turn the 4/¢ control to set the hour, then press SET.

2)Turn the 4/¢control to set the minute, then press SET.

The unit enters source selecting mode. SET

WOOFER

25