To connect a center speaker and surround speakers
From center | CENTER | |
speaker | ||
|
From left surround speaker
From right surround speaker
•Connect the center speaker to the CENTER jack.
•Connect the left surround speaker to the LEFT jack.
•Connect the right surround speaker to the RIGHT jack.
•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.
To connect digital audio
OPTICAL
DIGITAL
OUTPUT
Before connecting optical digital cord, remove the protective cap from the OPTICAL DIGITAL OUTPUT terminal.
DO NOT plug in any equipment until all connections are complete.
To connect the AV COMPU LINK cords
The AV COMPU LINK control system allows you to use JVC’s TV with simple operations; by starting playing back a disc, the TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.
To use AV COMPU LINK, you need to connect the unit and the TV by using a cord with monaural
To set the video output selector
You can select the video output to match it to the color system of your TV.
NTSC: For an NTSC TV or
TV.
PAL: For a PAL TV or
TV.
Adjusting the Voltage Selector
Use a screwdriver to rotate the voltage selector so that the voltage marker is pointing at the same voltage as where you are plugging in the unit. (See also the back cover page.)
To connect other equipment
By using a stereo mini plug cord (not supplied), you can connect equipment with analog audio output jacks such as an MD player, a TV, etc.
Stereo mini plug cord (not supplied)
AUX
Portable audio device,
Game, etc.
(front panel)
If the audio output on the other equipment is not stereo mini plug type, use a plug adapter to convert the stereo mini
plug to the corresponding plug of the audio output.
IMPORTANT
Always set volume to MIN when connecting or disconnecting the other equipment.
Voltage marker
DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.
7
