PICTURE SOURCE
You can obtain optimal picture quality by selecting an appropriate
Select one of the following:
AUTO: Normally select this.
When playing back a disc containing both video and film sources, the System automatically changes the processing to match it to the picture type (film or video source) of the current chapter.
FILM: To play a film source disc.
VIDEO: To play a video source disc.
SCREEN SAVER
You can activate or deactivate screen saver while operating the
Select one of the following:
ON: The
OFF: To cancel the screen saver.
FILE TYPE
If both audio tracks (MP3 or WMA files), still picture (JPEG files), and video
Select one of the following:
AUDIO:To play MP3/WMA files.
STILL PICTURE: To play JPEG files.
VIDEO: | To play |
7AUDIO Set up Menu
You can adjust the sound settings of the System.
AUDIO
| DIGITAL AUDIO OUTPUT | STREAM/PCM |
| |
| D. RANGE COMPRESSION AUTO |
| ||
|
|
|
|
|
|
|
|
|
|
| SELECT | USE | TO SELECT. USE ENTER TO CONFIRM | |
| ENTER | TO EXIT, PRESS [SET UP]. | ||
|
|
|
| |
|
|
|
|
|
DIGITAL AUDIO OUTPUT
When using the digital output terminal on the rear, set this correctly according to the connected component.
Select one of the following:
PCM ONLY: To connect to a linear PCM digital equipment such as an MD recorder.
DOLBY DIGITAL To connect to a Dolby Digital decoder
/PCM:or an amplifier with a
Digital decoder.
STREAM/PCM: To connect to a DTS decoder or an amplifier with a
•See also “OPTICAL DIGITAL OUTPUT Signals” on page 53.
D. RANGE COMPRESSION
You can compress the dynamic range (the difference between the loudest sound and the softest sound) to enjoy a powerful sound even at a low volume level when listening to Dolby Digital software. This is useful at night.
• The effectiveness varies depends on a software.
Select one of the following:
AUTO: To enjoy powerful sounds with full dynamic range.
ON: Best for watching a movie at a low volume level.
41