Daily Operations—Playback
In this manual, the operation using the remote control is mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks.
1
10 Keys
RETURN
TOP MENU | MENU |
2/3/5/∞
ENTER
2
7,8
GROUP SKIP 
1/¡
4/¢ 
SHIFT 
3
1
2
3 |
¥Turn on the power.
The STANDBY lamp on the main unit goes off.
•Without pressing 
(STANDBY/ON), the System also turns on by pressing one of the source select buttons in the next step.
øSelect the source.
Playback automatically starts if the selected source is ready to start playback.
•If you press AUX, start playback source on the external component.
πAdjust the volume.
[Operate the target source as explained later.
To turn off (stand by) the system
The STANDBY lamp on the main unit lights in red.
• A small amount of power is always consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack on the main unit. The sound will no longer come out of the speakers. Be sure to turn down the volume before connecting or putting the headphones.
•Disconnecting the headphones will activate the speakers again.
DO NOT turn off (standby) the System with the volume set to an extremely high level; Otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the System or start playback.
Canceling the Demonstration
Main Unit
ONLY
2sec.
CANCEL |
|
/DEMO | DEMO OFF |
DEMO START
14
