JVC CA-MXJD8UW English, A-BRepeat, Time Search, Finish the setting, Select “A-B”, 4Enter the time

English

5 Finish the setting.

Pop-up window goes off.

To cancel Repeat Play, select “OFF” in step 4.

A-B Repeat

1While playing, display the on-screen bar with the pull-down menu.

2Select OFF .

3Display the pop-up window.

DVD-VIDEO 8.5Mbps			TITLE 2	CHAP 3	TOTAL 1:01:58
TIME	OFF	CHAP.	1/3	1/ 3	1/1

OFF

4 Select “A-B”.

DVD-VIDEO 8.5Mbps			TITLE 2	CHAP 3	TOTAL 1:01:58
TIME	OFF	CHAP.	1/3	1/ 3	1/1

A–B

5 Select the start point (A).

DVD-VIDEO 8.5Mbps			TITLE 2 C
TIME	A-	CHAP.	1/3

•Before pressing ENTER, you can search for the end point using ¡.

6 Select the end point (B).

A-B Repeat starts. The selected portion plays repeatedly.

To erase the on-screen bar

Time Search

You can move to a particular point by specifying the elapsed playing time from the beginning.

1While playing (without PBC for SVCD/VCD), display the on-screen bar with the pull-down menu.

•Except for DVD: Time Search can be used before starting playback.

2Select .

3Display the pop-up window.

DVD-VIDEO 8.5Mbps			TITLE 2	CHAP 3	TOTAL 1:01:58
TIME	OFF	CHAP.	1/3	1/ 3	1/1
	TIME	_ : _ _ : _ _

4Enter the time.

You can specify the time in hours/minutes/seconds.

Examples:

To move to a point of 1 (hours): 02 (minutes): 00 (seconds), press 1, 0, 2, 0, then 0.

To move to a point of 54 (minutes): 00 (seconds), press 0, 5, 4, 0, then 0.

•It is always required to enter the hour digit (even “0” hour), but it is not required to enter trailing zeros (the last two digits in the examples above).

•To correct a misentry, press cursor 2 to erase the last entry.

5 Finish the setting.

The System starts playing from the specified time.

To erase the on-screen bar

32