JVC CA-MXJD8UW manual Adjusting the Front Speaker Remote, Output Balance, Creating Your Own Sound

Adjusting the Front Speaker Remote

ONLY

2Enter into the SEA Control Mode.

•You can enter the SEA Control Mode only while the

Output Balance Sound Mode appears on the display.

You can adjust the output balance of left front speaker and right front speaker within the range of R (right) –6 (minimum sound level from the right speaker) to L (left) –6.

L/R BALANCE		Decreases the left
L	R	front speaker output
1	2

level.

SET

/DISPLAY

TITLE

TITLE

Decreases the right

(holding then...)front speaker output level.

3Adjust the SEA pattern.

1 Select one of the tone—BASS or TRE (treble).

PRESET

Selecting the Sound Modes

You can select one of the preset Sound Modes.

	ROCK POP CLASSIC
	FLAT
SEA (Sound Effect Amplifier) modes
ROCK	Boosts low and high frequency. Good for
	acoustic music.
POP	Good for vocal music.
CLASSIC	Good for classical music.
User modes
USER 1/2/3	Your individual mode stored in memory.
	See the next column “Creating Your Own
	Sound Modes—User Mode.”

2Adjust the level of the selected tone.

•You can adjust the bass and treble level from –3 to +3.

3Repeat steps 1 and 2 to adjust the level of the other tone.

4Finish the SEA pattern setting.

4Select one of the User Modes.

PRESET

TUNING

SET

/DISPLAY

FLAT	No Sound Mode effect.
Creating Your Own Sound		INFO

Main Unit

TITLE

5Finish the setting.

Modes—User Mode

ONLY

SET
/DISPLAY	TITLE

You can create your own Sound Modes to make sounds suit your taste. The changed settings can be stored as the USER 1, USER 2 and USER 3 modes.

1Select one of the preset Sound Modes.

SOUND

MODE

ROCK POP CLASSIC

FLAT

20