JVC CA-MXJD8UW Listening to the Radio, To select the AM tuner interval spacing, AM 9 k AM 10 k

Listening to the Radio
	INFO

To select the AM tuner interval spacing

Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing.

You can change the AM tuner intervals during the unit is turned on.

While AM is selected...

AM 9 k

AM 10 k

(holding then...)

To select the band (FM/AM)

FM AM

To tune in to a station

While FM or AM is selected...

1sec.

Increases the frequencies.

Decreases the frequencies.

When a station (frequency) with sufficient signal strength is tuned in, the frequency search stops.

To stop searching manually, press either button.

•When you repeatedly press the button, the frequency changes step by step.

Main Unit

ONLY

To preset Stations

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset, then enter into the presetting mode.

SET
/DISPLAY	ST

2Select a preset number for the station you store.

PRESET

ST

3Store the station.

SET

/DISPLAY

ST

To turn in to a Preset Station

1 Select the band (FM or AM).

FM AM

2Select a preset number for the station you store.

Examples:

To select preset number 5, press 5. To select preset number 15, press +10, then 5.

If the received FM station is hard to listen

Remote

ONLY

To select preset number 30, press +10, +10, then 10.

	The MONO indicator
	lights on the display.
	Reception will improve
	though stereo effect is
	lost—monaural
	reception mode.
(holding then )...	To restore the stereo
	effect, press the button
	again (the MONO
	indicator goes off).

• You can also use 4/¢ buttons on the remote control or the PRESET +/– buttons on the main unit.

15