JVC CA-MXJD8UW To record without creating a 4-second blank, For recording desired tracks on discs

DUBBING

• When either tape playback or recording ends, both cassette decks stop at the same time.

To stop dubbing

36

Start dubbing.

4

TAPE-B

2 Insert the source cassette in deck A, and a recordable cassette in deck B.

3 Check the tape running direction and Reverse Mode settings on the display.

See step 2 of “Recording on a Tape” on page 35.

Change the source to TAPE.

1

Main Unit

ONLY

REC

START/STOP

To stop recording

REC

START/STOP

or

Dubbing Tapes

Start recording.

4

Start playing the source—“FM,” “AM,” “DVD/CD,” “TAPE-A” or “AUX.”

• When recording a disc, you can also use “Synchronized Disc Recording” (see the right column).

3

English

Synchronized Disc Recording	Main Unit
		INFO
	ONLY

You can start and stop both disc play and tape recording at the same time.

1Load a disc and insert a recordable cassette.

•If the current playing source is not the disc player, press DVD/CD 3, then 7.

2Check the tape running direction and Reverse Mode settings on the display.

•See step 2 of “Recording on a Tape” on page 35.

For recording desired tracks on discs:

You can program tracks to record with your preferred order.

•Select Program Play (and make a program (see page 27)) without starting playback.

3Start recording.

DISC REC	The System automatically
START	creates 4-second blanks between
	the tunes recorded on the tapes.

•When either disc play or recording ends, both disc player and the cassette deck stop at the same time.

To record without creating a 4-second blank

1Press DVD/CD 3, then press 8.

2Press 4 to go back to the beginning of the track.

3Start recording.

To protect your recording

Cassettes have two small tabs on the back to protect from unexpected erasure or re-recording.

To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with

adhesive tape.