JVC CA-MXK50R Using the Timers, Using Daily Timer, Press CLOCK/TIMER again, Before you start

Using the Timers

There are three timers available—Daily Timer, Recording	2 Press CLOCK/TIMER again.
Timer, and Sleep Timer.
Before using the timers, you need to set the clock built in the	“ON TIME” appears for 2 seconds, then the
	unit enters on-time setting mode.
unit. (See “Setting the Clock” on page 9.)

CLOCK

/TIMER

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the on-time comes (the indicator flashes while the timer is operating). Then, when the off-time comes, the unit automatically turns off (stands by).

Daily Timer works every day unless you cancel it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting timer, press CANCEL/DEMO. (However, this does not always work. If CANCEL/DEMO does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)

Before you start...

•When using a CD as the source to play:

—Make sure there is a CD on the currently selected disc number tray.

•When using a tape as the source to play:

—Make sure that a tape is in the deck whose deck indicator (A or B) is lit on the display.

•When using the external component as the source to play:

—Set the timer equipped with the external component at the same time.

On the unit ONLY:
1 Press CLOCK/TIMER repeatedly	/TIMER
	CLOCK
until “DAILY” appears on the display.

indicator lights up and the DAILY (daily timer) indicator starts flashing on the display.

•Each time you press the button, the clock/timer setting modes change as follows:

DAILY ON TIME REC

(Daily Timer)

Canceled CLOCK ON TIME

(See page 9.) (Recording Timer)

3 Set the on-time you want the unit to turn on at.

1) Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute, then press SET.

“OFF TIME” appears for 2 seconds, then	SET
the unit enters off-time setting mode.

4 Set the off-time you want the unit to turn off (on standby) at.

1) Press 4 or ¢to set the hour, then press SET.

2)Press 4 or ¢to set the minute, then press SET.

The unit enters source selecting mode. SET

5 Press 4 or ¢ to select the source to play, then press SET.

• Each time you press 4 or ¢, the source changes as follows:

TUNER FM TUNER MW TUNER LW SET

AUX TAPE CD

TUNER FM : tunes in to a specified preset FM station.

=go to step 6.

TUNER MW: tunes in to a specified preset MW station.

=go to step 6.

TUNER LW : tunes in to a specified preset LW station.

	= go to step 6.
CD	: plays a disc from the first track.
	= go to step 7.
TAPE	: plays a tape in deck A or B.
	= go to step 7.
AUX	: plays an external source.
	= go to step 7.

– 21 –