Continued
6 Select the preset station number.
Press 4 or ¢ to select the preset station number, then press SET.
The unit enters volume setting mode.
SET
7 Press 4or ¢ to set the volume level.
• You can select the volume level from VOL MIN, VOL 1 — VOL 30, and VOL MAX.
8 Press SET to complete the Daily | SET |
Timer setting. |
|
The DAILY (daily timer) indicator stops flashing and remains lit. The settings you have done are shown on the display in sequence for your confirmation.
9 Press | STANDBY/ON to | ECO |
|
| STANDBY |
turn off the unit (on standby) | STANDBY/ON | |
| ||
if you have set the Daily Timer |
| |
with the unit turned on. |
| |
If the unit is turned on when the
Daily Timer does not work.
To turn on or off Daily Timer after its setting is done
1 Press CLOCK/TIMER repeatedly until | CLOCK |
/TIMER | |
“DAILY” appears on the display. |
|
2To turn off the Daily Timer, press CANCEL/
DEMO. | CANCEL |
The DAILY (daily timer) indicator goes off from | /DEMO |
the display (“OFF” appears for a while). |
|
The Daily Timer is canceled, but the setting for |
|
the Daily Timer remains in memory until you |
|
change it. |
|
To turn on the Daily Timer, press SET. | SET |
The DAILY (daily timer) indicator lights up on |
|
the display. The settings you have done are |
|
shown on the display in sequence for your |
|
confirmation. |
|
Using Recording Timer
With Recording Timer, you can make a tape of a radio broadcast automatically. You can set the timer whether the unit is on or off.
How Recording Timer actually works
The unit automatically turns on, tunes into the specified station, sets the volume level to “VOL MIN,” and starts recording when the 
indicator flashes while the timer is operating). Then, when the
Recording Timer works only once, but the timer setting remains in memory until you change it.
•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 2 again.
•If you have made a mistake while setting the timer, press CANCEL/DEMO. (However, this does not always work. If CANCEL/DEMO does not work, press CLOCK/TIMER repeatedly and start from step 2 again.)
On the unit ONLY:
1 Put a recordable cassette into deck B.
2 Press CLOCK/TIMER repeatedly | /TIMER |
| CLOCK |
until “REC” appears on the display. |
|
indicator lights up and the REC (recording timer) indicator starts flashing on the display.
•Each time you press the button, the clock/timer setting modes change as follows:
DAILY |
|
| ON TIME |
|
| REC | |
|
|
|
| ||||
|
|
| (Daily Timer) |
|
|
| |
Canceled |
|
| CLOCK |
|
| ON TIME | |
|
|
|
| ||||
(See page 9.) (Recording Timer)
3 Press CLOCK/TIMER again. | /TIMER |
| CLOCK |
“ON TIME” appears for 2 seconds, then the |
|
unit enters
– 22 –
