Using the Timers
SLEEP
CLOCK/TIMER |
SET |
¢ |
4 |
SLEEP indicator
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Timer indicator |
| DAILY Timer indicator | |||
|
|
|
|
|
|
REC (Recording) Timer indicator
*When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.
Three types of timers are available:
DAILY Timer
Use this timer to set wake up everyday to music from any source, instead of an alarm clock.
REC (Recording) Timer
Unattended recording of radio broadcasts. You can set the starting time and ending time.
SLEEP Timer
Fall asleep and have your System turn off automatically after a certain length of time.
Setting the Clock
When you plug the AC power cord into the wall outlet, the time in- dication “0:00” blinks on the display.
You can set the clock whether the System is on or off.
Fixing the Clock
Using the Unit
1 Press the 
STANDBY/ON button to turn on the System.
2 Press the CLOCK/TIMER button repeatedly until clock setting display (time indication) appears on the display.
The hour digits of the current clock blink on the display. Each time you press the button, display changes as follows: DAILY =ON TIME =REC TU =ON TIME =Clock Set- ting display (time indicator) =Canceled =(back to the begin- ning)
Using the Unit
1 Press the CLOCK/TIMER button.
The hour digit of the time indication blinks on the display.
2 Press the 4or ¢button to set the hour.
Pressing the ¢button moves the time forwards and pressing the 4 button moves it backwards. Holding down the button moves the hour rapidly.
3 Press the SET button.
The minute digits of the time indication blink on the display.
• To return to the hour setting, press the CANCEL button.
4 Press the 4or ¢button to set the minute. 5 Press the SET button.
“CLOCK OK” appears on the display. Then, the selected time is set and the seconds start counting from 0.
3 Follow steps 2 to 5 of “Setting the Clock” men- tioned above.
•The clock must be correctly set for the timers to work.
•The clock may gain or lose one to two minutes per month.
•If there is a power failure, the clock loses its setting immediately. “0:00” blinks on the display and the clock must be reset.
20
