JVC DLA-HX2E manual Connecting to Devices,  Connecting to Video Devices, Right side of projector

Connecting to Various Devices

Connecting to Devices

Before connection, be sure to turn off both the projector and the device.

Connecting to Video Devices

•Thoroughly read the manual that comes with each video device.

•Use the supplied AV connection cable. S-video (Y/C) cable, BNC cable, DVI cable and PC Audio cables are not supplied.

Right side of projector

BNC Cable (sold separately)

DVI Cable

(sold separately)

R PR/CR	G Y	B PB/CB	H/CS	V			DVI
					PC1		PC3
		PC2
SCREEN		REMOTE	RS-232C OUT		RS-232C IN	Y/C	VIDEO
TRIGGER	AUDIO IN			CONTROL		VIDEO IN

PC Audio cable	S-video cable
(sold separately)	(sold separately)

AV connection cable (supplied)

Video Device 1

VCR (Video cassette recorder)

DVD player

Camcorder

Image input

•Connect a composite image signal output device or Y/C (S-video) image output device.

Sound input

• Connect to [AUDIO IN] terminal.

Video Device 2

D-VHS or DVD player etc.

Image input

•Connect to component signal output device, DTV format signal output device, HDCP compatible video signal output de- vice, etc.

•When the [PC2] input terminal is used, the “PC2(BNC)” item in “Options” menu must be correctly set. (☞ page 39)

•When the [PC3] input terminal is used,

the “PC3(HDCP)” item in “Options” menu must be correctly set. (☞ page 39)

Sound input

• Connect to [AUDIO IN] terminal.

Connection

•When connecting a video device, please use a TBC along with it, or use one with a built-in TBC.

•Use of an extension cable to connect a video device and the projector could cause image deterioration or projection failure.

•When a signal with much jitter is reproduced on a VCR, or special-effect playbacks are performed, the upper part of the image or the screen may be interrupted, erased or distorted.

21