Connecting to Various Devices
Connecting the Power Cord (supplied)
After all devices have been connected, connect the supplied power cord.
1
2
Power cord (supplied)
1. Connect the supplied power cord to the power in- put terminal of the projector
2. Insert the main plug of the supplied power cord into the wall outlet
(e.g.)
Cautions Against Fire and Electric Shock
●Since the power requirement of the projector is high, please insert the power plug directly into a wall outlet.
●When not using devices, remove the power plug from the wall outlets.
●Do not use power cords other than those supplied.
●Do not use a power voltage different from that which is indicated.
●Do not cut, tear or modify the power cords. Also, do not put a heavy object on, heat, or stretch the power cords, otherwise they may be damaged.
●Do not insert or pull out the plugs with a wet hand.
When using the projector, remove the Lens Cap
•Be sure to fit the lens cap on when the projector is not in use to keep out dirt.
•Do not project with the lens cap attached. The lens cap may
be deformed by heat or this may cause malfunction.
Lens Cap
24
