Connecting External Components
Connecting an External Analog Component

Example: Analog signal components such as a VCR, Camcorder, and TV.

(not supplied)Audio Cable

If the external analog component has only one Audio Out, connect either left or right.

1 Connect Audio In on the DVD player to Audio Out on the external analog component.

•Be sure to match connector colors.

2 Press AUX/PORT to select AUX 1.

• ‘AUX 1’ appears in the display.

AUX2 : Connecting an External Analog Component

Analog signal components such as a VCR.

OPTICAL:Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver(Set -Top Box).

ENG

 

Optical Cable

 

 

(not supplied)

CONNECTIONS

 

Extermal Digital Component

 

 

1

Connect the Digital Input(OPTICAL) on the Mini Component to the Digital Output of the

 

 

external digital component.

 

2 Press the AUX/PORT button to select DIGITAL IN.Connecting the FM Antennas
AUX2 : Rear Panel

Audio Cable (not supplied)

If the external analog component has only one Audio Out, connect either left or right.

1

2

Connect AUX IN 2 (Audio) on the MINI COMPONENT

rear panel to the Audio Out of the external analog component.

■Be sure to match connector colors.

Press the AUX//PORT button to select <AUX2> input. The mode switches as follows : AUX 1 ➝ AUX 2.

FM Antenna (supplied)

FM antenna connection

1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

•If reception is poor, connect an outdoor antenna.

Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM antenna.

15

Note

• This unit does not receive AM broadcasts.

16