Listening to a Cassette
Always treat your cassettes with care; refer, if necessary, to the section entitled “Precautions When Using Audio Cassettes” on page 62.
Recording a Compact Disc | ENG |
You can record a compact disc on a cassette in two different ways:
STANDBY ON.
4 Press the button. The cassette starts playing.
•Side A : Tape () button once.
•Side B : Tape () button twice
• Rewind the cassette | / DOWN |
button. |
|
• | |
button. |
|
3Press the PUSH OPEN () of the
cassette deck to open the cassette door and insert a cassette.
•Insert a cassette with the recording/playback side facing the cassette holder, and then push the cassette door shut.
6 | When you have |
finished playback, | |
press STOP button. |
Synchronised recording
This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice only on Audio CD.
• You can use | / | on the | ||
remote control to instead of |
|
| ||
| ||||
on the main set . |
|
|
|
|
1 Switch the system on by pressing
STANDBY/ON.
Insert a blank | 3 | Load a disc. |
2 cassette in Tape. |
|
Your mini component system has three cassette playback modes which enable you to listen to both sides of a cassette automatically. .
•Press the PUSH OPEN button ( ) to open the cassette door, insert a cassette, and then close the cassette door.
•Insert the cassette with the safety tabs.
Press REVERSE MODE until the appropriate symbol is displayed.
• : One side of the selected cassette and then stops.
• : One side of the cassette.
The other side of the cassette and then stops.
• : Both sides of the cassette indefinitely until you press stop.
•Use the CD selection ( , ) buttons to select the desired song.
button.
•When stopped, press and hold the button to start the recording from the first piece of music.
•Press and hold CD SYNCHRO button during the playback of CD to start the recording from the first part of the music being played.
Note
•You can use CD/SYNCHRO button only in CD Playback Mode.
DECK TAPE
51
52