3.INSTALLATION
3. INSTALLATION
CAUTION
Machine installation should only be carried out by | All cords should be secured at least 25 mm away | |
a qualified technician. | from any moving parts. Furthermore, do not | |
Contact your Brother dealer or a qualified electrician | excessively bend the cords or secure them too | |
firmly staples, otherwise there is the danger that | ||
for any electrical work that may need to be done. | ||
fire or electric shocks could occur. | ||
The sewing machine weighs more than 87 kg. The | ||
Be sure to connect the ground. If the ground | ||
installation should be carried out by two or more | ||
connection is not secure, you run a high risk of | ||
people. | ||
receiving a serious electric shock, and problems | ||
Do not connect the power cord until installation is | ||
with correct operation may also occur. | ||
complete, otherwise the machine may operate if | Install the belt covers to the machine head and | |
the start switch is pressed by mistake, which could | ||
motor. | ||
result in injury. | ||
|
3-1. Table processing diagram
Use the special table indicated below.
Thread trimmer | Product code |
|
|
Upper thread trimmer | |
Upper and lower thread trimmer | |
|
|
If using a
Note: The thickness of the table should be at least 50 mm, and it should b e strong enough to bear the weight and vibration of the sewing machine.
2011Q
3
