Brother DH4-B980 instruction manual Setting a program

6. USING THE OPERATION PANEL AND FRONT PANEL

6-5. Setting a program

1130Q 1131Q

1.	Push the section on the front panel marked "PUSH"
	to open the front panel.
2.	Press the MODE button (1) to switch to
	programming mode.
	Programming will not be possible unless the
	PROGRAM indicator is illuminated.
	* The SPEED indicator (A) will illuminate and the
	current sewing speed appear on the front panel
	display (J).
3. Press the PROGRAM NUMBER button (2) until the
	desired program number appears in the program

(2) (3) (1)

(K)

(M)

(A)

(J)

(L)

(N)

1132Q

(J)

(L)

(N)

(K) (M)

1133Q

number display window (3).
4. Press the SELECT button (M) to select a letter from
"A" to "P4."
* The character displayed changes in the following
order each time the button is pressed.
→ A→ B	P4

Then make the required settings by following steps 5. and 6. below.

5.Press the "Up" button (L) or the "Down" button (K) to change the setting value.

*When the setting value is changed, the numerals appearing in the display will flash.

6.Press the ENTER button (N) to accept the changed value.

*The display will stop flashing.

Note: If you press the SELECT button (M) or the MODE button (1) while the display is still flashing, the setting value will not be changed.

RH-9800

21