6. USING THE OPERATION PANEL AND FRONT PANEL
P4. Setting θ 2 correction
|
| (K) | (L) |
|
| ||
|
|
| (N) |
|
|
|
|
1158Q | 1159Q | ||
|
|
|
|
1.The setting range is from
*Set to a larger value if you would like to rotate the eyelet seam clockwise (when seen from the
finished side, or the reverse side when sewing).
2. Press the “up” button (L) or the “down” button (K) to set θ 2 correction value.
*When the setting value is changed, the value displayed will start to flash.
3.Press the ENTER button (N) to accept the θ 2 correction setting.
*The display will stop flashing and will start illuminating steadily.
26
