10. SUMMARY OF DIP SWITCHES
10. SUMMARY OF DIP SWITCHES
Always turn off the power supply before changing any of the DIP switch settings.
10-1. Front panel DIP switches
The ON/OFF positions of the DIP switches inside the front panel are checked only once when the power is turned on. Any changes to the DIP switch positions will not be effective until the power is switched off and back on again.
| No. | ON/OFF | Description | ||
|
|
|
|
| |
| 1 | *1 | ON | Program mode disabled | |
| OFF | Program mode enabled | |||
|
|
| |||
| 2 | ON | Spare | ||
| OFF | Spare | |||
|
|
| |||
3 | ON | Front position | |||
OFF | Back position | ||||
|
|
| |||
|
|
|
|
| |
| 4 | ON | Counting down to zero | ||
| OFF | Counting up from zero | |||
|
|
| |||
| 5 | ON | Pedal 1 operation | ||
|
|
| |||
| OFF | Pedal 2 operation | |||
|
|
| |||
6 | *3 | ON | Compatible with normally | ||
OFF | Compatible with normally | ||||
|
|
| |||
|
|
|
|
| |
7 | *2 | ON | Upper thread remaining amount = Large | ||
OFF | Upper thread remaining amount = Standard | ||||
|
|
| |||
8 | ON | Spare | |||
|
| ||||
OFF | Spare | ||||
|
|
|
*1 The version of the PROM is given as “E1” or later.
*2 The version of the PROM is given as “D1” or later.
*3 The version of the PROM is given as “F1” or later.
If the position of DIP switch No. 4 is changed, the production counter will be reset to zero. * The machine is shipped from the factory with the DIP switches set as follows.
1192Q
56