JVC DLA-M15U Fine-adjust the screen size, Follows, When you press Video, When you press Computer

Basic Operations (Cont.)

■ Projector’s buttons 2. Select the video input to be projected

STAND BY

■Press the VIDEO button or the COMPUTER button to switch the input.

• Each time you press either button, the selected input changes as

OPERATE

follows.

■When you press VIDEO:

LAMP

Y/C VIDEO Y,PB/B-Y,PR/R-Y

TEMP

EMERGENCY

■When you press COMPUTER:

VIDEO	VIDEO button	COMPUTER 1	COMPUTER 2
COMPUTER	COMPUTER button
SETTING		Remote control unit	Projector
+3		COMPUTER VIDEO	VIDEO
QUICK
ALIGN.
-2			COMPUTER
		Screen display
		V I D E O	N T S C ( 4 8 0 i )

■Remote control unit

OPERATE	COMPUTER	VIDEO
	T
VOL.	ZOOM	FOCUS
	W
PAGE	MENU/ENTER
BACK
PRESET
QUICK		AV
ALIGN.		MUTING

COMPUTER button VIDEO button

ZOOM (T/W) buttons

*When the input is switched, the line display (ex. VIDEO) and the source display (ex. NTSC(480i)) are shown on the upper part of the screen (they disappear in about five seconds). However, they will not be shown if LINE DISPLAY in “Setting and Adjusting Other Functions (OPTIONS)” on page 43 is set to OFF.

(For setting the source, see page 46.)

Note

• To select the proper audio input for video input

The video input terminal (AV IN input terminal) can be switched with the VIDEO button. However, since this projector has only a single audio input terminal, reconnect audio input in accordance with the AV device to be used.

3.Fine-adjust the screen size

■Fine-adjust the screen size with the remote control’s ZOOM (T/W) buttons.

■To enlarge the screen size: Press the ZOOM (W) button.

■To reduce the screen size: Press the ZOOM (T) button.

Remote control unit

ENGLISH

ATTENTIONS

•DO NOT give any shock to this projector while operating it; otherwise, the light-source lamp goes off (the EMERGENCY indicator lights up).

If the shock turns off the light-source lamp —

Turn off the power by pressing the MAIN POWER switch, then turn it on again. Now you can operate the projector as usual.

T

ZOOM

W

Notes

•This function, provided for fine-adjustment, is to be employed when dual stacking, etc. is used. The fine-adjustable range is approx. ±2%.

•The fine-adjustment of the screen size (zoom adjustment) can also be made on the setting menu.

For operating the setting menu, refer to “Making Basic Settings” on page 31.

27