JVC DLA-M15U r p q w e, Left-hand side, Controls and Features cont, English, q MAIN POWER switch

Controls and Features (cont.)

Left-hand side

r

p

q w

e

pAC IN (power input) terminal

This is the power input terminal where the supplied power cord is connected. For details, refer to page 24.

qMAIN POWER switch

This is the main power switch. When it is turned on, the projector goes into stand-by state, and the STAND BY indicator on the control panel comes on.

ON [ ❙ ]: The main power turns on.

OFF [à]: The main power turns off.

wConnector panel

For details, refer to “Connector Panel” on page 11.

eAdjustable foot (for horizontal angle adjustment)

It is set at the shortest position when shipped from the factory. Turn the foot to make the projector level. Adjustment can be made in the range of + 1.5° and – 1.5° from the horizontal position.

+1.5°

–1.5°

ENGLISH

Extend Shorten

rLENS SHIFT knob / SHIFT LOCK fixing bolt

The projection screen can be shifted up and down in position. Use this adjustment when you use a different installation configuration (such as dual stacking) which requires the lens to be shifted. The amount of lens shift can range from approx. 30% to 55%. For more information, refer to “Setting the Amount of Lens Shifting” on page 17.

7