![](/images/new-backgrounds/1192926/192926125x1.webp)
Replacing the
2 Loosen the
Loosen the two screws with a flat-end screwdriver.
Note
•The screws are fitted so that they do not come off the lamp- unit.
3 Insert the new lamp unit fully inside and fasten the screws.
Fasten the two screws with a flat-end screwdriver.
CAUTION
•Do not touch the glass surface of the
4 Replace the
Fasten the two screws with a
Screw
Lamp unit
2
1
Handle
Lamp unit
1
2
Handle
Screw
opening cover
Be careful not to damage the claw.
CAUTIONS
•Install the lamp unit and close the
•If the claw on the
•After replacing the lamp, be sure to reset the lamp use time (see page 63).
62