JVC 0303-MK-ID-SN Dubbing Still Images Recorded On a Tape To a Memory Card, To Reset The Setting

Dubbing Still Images Recorded On A

Tape To A Memory Card

Still images can be dubbed from a tape to a memory card.

1 Load a memory card ( pg. 11) and cassette ( pg. 9).

2 Set the VIDEO/MEMORY Switch t to ÒVIDEOÓ,

then set the Power Switch @ to Ò Ó while pressing down the Lock Button $.

3 Press MENU 4. The Menu Screen appears. Press +

or – 5 to select Ò VIDEOÓ and press SELECT/SET

3.

4 Press + or – 5 to select Ò COPYÓ and press SELECT/SET 3. The Sub Menu appears. Press

+or – 5 to select ÒONÓ and press SELECT/SET 3. Selection is complete.

5 Press + or – 5 to select Ò RETURNÓ and press SELECT/SET 3 twice. The normal playback screen reappears.

6 To select a video image to be dubbed, start playback by pressing 4/6 !. At the moment you find the image you wish to dub, press it again to engage Still Playback.

7 To start dubbing, press SNAPSHOT 9. The selected image is stored on the memory card.

¥ ÒÓ blinks during dubbing.

NOTES:

●If SNAPSHOT 9 is pressed in step 7 when a memory card is not loaded, the message ÒCOPYING FAILEDÓ is displayed.

●To change the Snapshot mode for dubbing,  pg. 29.

●If an image recorded on the tape using the WIDE mode ( pg. 33) is dubbed to a memory card, the WIDE mode identifying signal is not dubbed with it.

●To use Playback Special Effects with a video image you

wish to dub, perform up to step 7 using the remote control ( pg. 39).

●Images are dubbed in 640 x 480 pixels.

Display

V I DEO 6

COPY – OF F

ON

Menu Screen

Setting Print Information

(DPOF Setting)

This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing, which records information about the still images you wish to print (such as the number of prints to make). There are 2 print information settings available: ÒTO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)Ó explained below and ÒTO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTSÓ.

TO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)

1 Set the VIDEO/MEMORY switch t to ÒMEMORYÓ,

then set the Power Switch @ to Ò Ó, while pressing down the Lock Button $ located on the switch.

¥Make sure an IMAGE file is displayed ( pg. 18, ÒNormal PlaybackÓ).

2 Press MENU 4. The Menu Screen appears.

3 Press + or – 5 to select ÒDPOFÓ and press SELECT/SET 3. The Sub Menu appears.

4 Press + or – 5 to select ÒALL 1Ó and press SELECT/SET 3. Selection is complete. The DPOF Screen appears.

5 Press + or – 5 to select ÒEXECUTEÓ and press SELECT/SET 3. The normal playback screen appears.

¥To cancel selection, press + or – 5 to select ÒRETURNÓ and press SELECT/SET 3.

To Reset The Setting . . .

..... select ÒRESETÓ in step 4. The setting is reset to 0

for all still images.

TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS

1 Perform steps 1 through 3 of ÒTO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)Ó.

2 Press + or – 5 to select ÒCURRENTÓ and press SELECT/SET 3. Selection is complete. The DPOF Screen appears.

3 Turn the SHUTTLE SEARCH Ring # counterclockwise (2) or clockwise (3) so that the image you wish to print appears.

4 Press + or – 5 to move the highlight bar to the SHEETS number indication and press SELECT/SET

3.

Continued on next page.

EN

ADVANCED FEATURES 23