JVC EX-D11 Connecting with TV, Connecting the power cord, Connecting with a portable audio device

Getting started

Connecting with a portable audio device

Stereo mini plug cord	Portable
(not supplied)
	audio device
In the door of the
front panel
AUX 1

•By using QP Link (Quick Portable Link), you can easily start playing back a portable audio device on this unit. See page 33 for details.

•If an external device is not equipped with a stereo mini plug audio output, use a plug adaptor to convert the stereo mini plug to the corresponding plug of the audio output.

Connecting with TV

Connecting by using the component video cord

You can enjoy better quality pictures than when using the S-Video cord.

TV

Component video cord (not supplied)

Blue

Green

Red

Supplied composite video cord

Main unit

COMPONENT VIDEO

Y PB PR

S-VIDEO

VIDEO OUT

CAUTION

TV

COMPONENT VIDEO

Y PB PR

S-VIDEO

VIDEO OUT

Main unit

Connect the main unit directly with a TV (or a monitor) without routing through a VCR. Otherwise it may cause picture distortion while playing.

	TV (or
Main unit	monitor)

Connecting directly

Also, when connecting the main unit to a TV with a VCR built in, there may be picture distortion while playing.

You can enjoy pictures of better quality using the following cord instead of the supplied video cord.

Connecting by using the S-Video cord

Main unit	S-Video cord (not	TV
	supplied)

COMPONENT VIDEO

Y PB PR

S-VIDEO

VIDEO OUT

CAUTION

Use either the S-Video cord or the component video cord. If both cords are used, pictures may not be played properly.

NOTE

•In order to enjoy pictures with Progressive mode (page 26), the TV is required to have Progressive video input.

•If the component video input jacks of your TV are BNC type, use a plug adapter (not supplied) to convert the plugs.

Connecting the power cord

AC outlet

Supplied power cord Main unit

•Connect the power cord after all other connections are complete.

•The STANDBY lamp (on the front panel) will be lit.

11