Getting started

TV

Supplied composite video cord

Main unit

COMPONENT VIDEO

Y PB PR

S-VIDEO

VIDEO OUT

You can enjoy pictures of better quality using the following cord instead of the supplied video cord.

Connecting by using the S-Video cord

Main unit

S-Video cord (not

TV

supplied)

 

 

 

COMPONENT VIDEO

 

 

Y PB PR

 

 

S-VIDEO

VIDEO OUT

Connecting by using the component video cord

You can enjoy better quality pictures than when using the S-Video cord.

TV

Component video cord (not supplied)

Blue

Green

Red

COMPONENT VIDEO

Y PB PR

S-VIDEO

VIDEO OUT

Main unit

CAUTION

Use either the S-Video cord or the component video cord. If both cords are used, pictures may not be played properly.

NOTE

In order to enjoy pictures with Progressive mode (page 26), the TV is required to have Progressive video input.

If the component video input jacks of your TV are BNC type, use a plug adapter (not supplied) to convert the plugs.

Connecting the power cord

AC outlet

Supplied power cord

Main unit

Connect the power cord after all other connections are complete.

The STANDBY lamp (on the front panel) will be lit.

Selecting an AM interval spacing

You can change the AM interval spacing.

Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing.

Before doing the following procedure, select AM as source, then turn off the unit.

Use the buttons on the main unit.

To set the AM tuner to the 10 kHz spacing:

While holding ¢, press

STANDBY/ON .

To set the AM tuner to the 9 kHz spacing:

While holding 4, press

STANDBY/ON .

Changing the color system

You can select the video output to match it to the color system of your TV (PAL or NTSC).

1Press and hold VFP for 4 seconds while the system is turned off (on standby).

2Press cursor 2/3 to select the video output. Press ENTER to set the video output.

11

Page 57
Image 57
JVC EX-D11 Selecting an AM interval spacing, Changing the color system, While holding ¢, press, While holding 4, press