JVC FS-J50 Selecting the Display Color ONLY FOR FS-J60, Selecting the Illumination Brightness

English

To enjoy the heavy sound (ONLY FOR FS-J60)

You can enjoy the heavy sound. The function boosts low and high frequency sounds—Sound Turbo.

Press SOUND TURBO.	TURBO
	SOUND

•Each time you press the button, the Sound Turbo is turned on and off alternately. When it is turned on, the BASS indicator lights up on the display.

BASS

When the Sound Turbo is on, the bass and the treble levels are set to +2 (see page 10). After the Sound Trubo is canceled, these levels restored to the previous levels.

To reinforce the surround effect (ONLY FOR FS-J60)

You can reinforce the surround effect.

•This function does not affect your recording and playback sound of monaural sources.

To get the effect, press SURROUND so that	SURROUND
the SURROUND indicator lights up on the
display.

To cancel the effect, press SURROUND again so that the SURROUND indicator goes off.

Selecting the Display Color (ONLY FOR FS-J60)

You can select the display color (COLOR 1 – COLOR 5 and AUTO mode).

•AUTO mode changes the color (COLOR 1 to COLOR 5) gradually.

To select the color, press COLOR.	COLOR
• Each time you press the button, the color
changes as follows:

AUTO COLOR 1 COLOR 2

COLOR 5 COLOR 4 COLOR 3

Selecting the Illumination Brightness

You can change the illumination and display brightness only while the unit is turned on.

On the remote control ONLY:

To change the brightness, press DIMMER.

DIMMER

•Each time you press the button, the illumination and display dim (DIM ON) and brighten (DIM OFF) alternately.

11