9
Getting started
Please read P. 10 of this manual to set up your monitor.
zStand, stand cover, screws and plates are also included. For details, refer
to page 8.
Follow the instructions on page 8 to attach the stand provided to the monitor.
zPlace the monitor on a flat and stable location.
Power requirements
zConnect the power cord only to a 100 - 240 V, 50/60 Hz AC outlet.
Installation requirements
zTo prevent the monitor from falling, thread the belt through the hole on the
back of the stand and secure it to the rack, etc.
Use two “AAA/R03” dry cell batteries. Insert the batteries from the - end,
making sure the + and - polarities are correct.

Check accessories

Remote control “AAA/R03” Batteries
(For confirming the
monitor works)
Cleaning cloth
(For details on using the
cleaning cloth, see P. 8.)

WARNING:

Batteries shall not be exposed to
excessive heat such as direct
sunshine, fire or the like.
Circular polarizing glasses
(x2)
(For viewing 3D images)

Install your monitor

Insert the batteries

Hole
Belt and screw (not provided)
GD-463D10U_EN.book Page 9 Monday, June 8, 2009 4:20 PM