Parts Identification
Remote Control
1
2 | DISPLAY | ASPECT | POWER |
|
|
| |
3 | VIDEO A | VIDEO B COMPO. RGB | |
|
|
| |
4 | MUTING |
| VOLUME |
|
|
| |
5 | MULTIPLE | MONITOR | ADJUSTMENT |
MODE | ID SET | ID |
MENU/EXIT
6
7
8
9
p
q
1Remote signal transmission window
2DISPLAY button (page 12)
Use this button to display the input terminal, color system (for VIDEO A or B input), scan system (for COMPONENT input) and horizontal/vertical frequency (for RGB input). Pressing the button again will make the display disappear.
3VIDEO A, VIDEO B, COMPO. and RGB buttons (page 12)
Use these buttons to switch between inputs.
•Only for
4MUTING button (page 12)
Use this button to turn off the volume immediately. Pressing the button again will resume the previous volume level.
5MULTIPLE MONITOR ADJUSTMENT buttons (page 24)
Use these buttons to set IDs, etc. when serial connection is made.
6MENU/EXIT button
Use this button to display or erase menus.
While a
7Remote control cable jack (page 24)
Connect the remote control cable when using this remote control as a wired remote control.
8ASPECT button (page 13)
Use this button to switch between aspect ratios. Each time you press the button, the aspect ratio changes as follows:
REGULAR FULL
PANORAMIC ZOOM
9POWER button (page 12)
Use this button to turn on/off the power.
pVOLUME + / – buttons (page 12)
Use these buttons to adjust the volume level.
•Only for
q2 / 3 / 5 / ° buttons
Use these buttons to select menu items or make adjustments.
4